Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HEATER ASSEMBLY
1 Phillips head screwdriver, 1adjustable spanner
1.Assemble wheel(M) to the base, insert M8(1) and tighten M8
Put the end with rubber ring to burner assembly and assemble
the glass tube
5 Screw and tighten the reflector (A), put on the washer(5) and
assemble the reflector(A) by wing nuts(9).
nut(2)
- 14 -
2. Assemble the rubber ring to one end of glass tube
4 Connect the tube(F) to the burner assembly by 8 screws
3/16"(3) and tighten all screws
3.Connect Burner assembly to the tank by 8 screws(7) and 8
nuts M5(4)
Werbung
Inhaltsverzeichnis
