Abicor Binzel ROBO Compact W600 Betriebsanleitung Seite 51

ROBO Compact W600
11 Disassembly
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Disconnect all electrical connections.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Note the following instructions:
 8 Putting out of operation on page EN-17.
Disassemble the following:
1 Compl. cable assembly from wire feeder.
2 Torch neck from robot connection.
3 Parts to be disconnected.
BAL.0374.0 • 2019-04-01
11 Disassembly
EN - 25