Package Contents; Electrical Safety - DeWalt D26411 Bedienungsanleitung

IMPORTANT NOTICE
In order for this tool to be an effective paint stripper, it must
produce extremely high temperatures. As a consequence, the
stripper is capable of igniting paper, wood, paint and varnish
residue and similar materials.
As you become more familiar with the tool and develop the
proper technique, the danger of accidental ignition will be greatly
reduced. In establishing the proper technique, the best thing to
do is PRACTICE! Work on simple stripping projects, preferably
outdoors, until you get a "feel" for how to use your stripper safely
and effectively.
As you Practice, Observe the Following
Procedures for Safety
• Always be sure the tool is turned off and disconnected from
power supply when unattended.
• Clean the scraper blade often during use. Built up residue on
the blade is highly flammable.
• Experiment to find the optimum distance from the
tool's nozzle to the surface being stripped. This distance
25.4 mm–50.8 mm will vary depending on the material
being removed.
• Keep the heat gun moving ahead of the scraper blade at
all times.
• As you work, clean up loose pieces of paint as they accumulate
around the work area.
• When working indoors, keep away from curtains, papers,
upholstery and similar flammable materials.
• Above all, remember that this is a serious tool that is capable
of producing excellent results when used properly. Practice on
simple projects until you feel comfortable with your stripper.
Only then will you have mastered the proper technique.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot
during operation.
• Risk of personal injury due to prolonged use.

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.

WARNING: If the plug or power cord is damaged, it must
be replaced by the manufacturer or its representative or by
a D WALT authorised service centre.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 Heat gun
1 Set of accessories
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 8 , which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Air vents
2
Kick-off stand
3
EngLIsH
; the
2
21