Care And Maintenance; Troubleshooting Guide; Specifications - Clas Ohlson FT25-U2 Bedienungsanleitung

Overheating protection
The fan is equipped with overheating protection which automatically trips whenever
the fan overheats. If the overheating protection trips, unplug the fan from the wall
socket and let it cool for at least 20 min. Do not expose the fan to direct sunlight
during this time.

Care and maintenance

• Turn off the fan, unplug it and let in cool thoroughly before cleaning.
• Unplug the mains lead from the wall socket and store the fan in a dry, dust-free
environment and out of the reach of children whenever the fan is not to be used for
any extended period.
Troubleshooting guide
The fan does not start.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.

Specifications

Supply voltage
Power consumption
Maximum fan flow rate (F)
Input power (P)
Service value (SV)
Measurement standard for service value
Standby mode power consumption (PSB) 0.29 W
Sound power (LWA)
Maximum air velocity (c)
Diameter
Weight
• Check that the mains lead is properly plugged into
an electrical socket.
• Check that the electrical socket is live.
• If the overheating protection has tripped (refer to
the Overheating protection section above).
220–240 V, 50 Hz
30 W
29.10 m³/min
27.8 W
1.05 (m³/min)/W
IEC 60879:1986 (corr. 1992)
56.4 dB(A)
2.07 m/sek
30 cm
2.5 kg
6