Care And Maintenance - Clas Ohlson FTH28-M1 Bedienungsanleitung

3. Fasten the base to the bottom of the main
fan body using the 3 wing screws.
Operating instructions
1. Place the product on a firm, level surface and plug it into a power point.
2. Turn the mode selector to the desired setting:
- Low (LOW), medium (MED) or high (HIGH) speed without oscillation.
- Low ( LOW), medium (
3. The fan can be switched off by setting the mode selector to either of the OFF
positions.

Care and maintenance

• Always unplug the product from the wall socket before cleaning.
• Wipe the outside of the housing with a clean, damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
• Check that the motor ventilation slits (7) are free from dust. Vacuum them if necessary.
• Always unplug the fan and store it in a dry, dust-free environment out of children's
reach whenever it is not to be used for an extended period.
Filter
Clean the air inlet filter regularly.
1. Access
the filter by
removing
the 3 screws
holding the air
inlet grille
in place.
MED) or high ( HIGH) speed with oscillation.
2. Open
the grille just
enough to
be able to
pull the filter
out (the grille
does not
need to be
removed).
5