Date/Time And Contrast Setting - Lenze EPM-H410 Betriebsanleitung

5.5

Date/time and contrast setting

You want to ...
A
Set the date/time and contrast on the
display.
1. Call up status messages.
2. Select menu for time/date and
contrast.
B
Set the date/time.
1. Select SET CLOCK" menu.
2. Select menu.
3. Select desired field.
4. Change value.
5. If necessary, repeat steps 3. and 4. to
change further values.
6. Confirm entry.
C
Set the contrast of the display.
1. Select SET CONTRAST" menu.
2. Select menu.
3. Set contrast.
4. Confirm entry.
D Close the status display.
EDBPM−H410 DE/EN/FR 4.1
Press keys ...
shift
Enter
PgUp
Enter
PgUp
Enter
PgUp
Enter
PgUp
more contrast
PgDN
less contrast
Enter
Clr
Esc
l
Commissioning
Date/time and contrast setting
Example
Port
Driver : VTNETBOARD
Ver
2x
Addr VT: NO ADDR
Error
ENTER : Set Clock / Contrast
PgDN
or
==>
or
12:50:10 13/09/00
PgDN
or
PgDN
or
==> SET CONTRAST : 04
CONTRAST : 04
5
: MSP
: 1.01
: INIT ERR 9
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
SET CLOCK:
Wed,13/09/00
12:50:10
83