Status Messages Of The Operating Unit; Status Displays On The Operating Unit - Lenze EPM-H410 Betriebsanleitung

5 Commissioning

Status messages of the operating unit

5.3 Status messages of the operating unit
You can always query the status of the keypad and get information about:
The serial interface
ƒ
The name of the loaded driver
ƒ
The version of the loaded driver
ƒ
The network address of the keypad
ƒ
The last error
ƒ
You want to ...
A query the status of the operating unit.
B close the status display.
5.4

Status displays on the operating unit

Display
LED red
LED green Power
LED
yellow
82
Press keys ...
On
Bus error −
Supply voltage
switched on
Battery Capacity of the
internal battery
depleted
Example
2x
shift
Port
Driver : CAN Lenze M
Ver
Addr VT: NO ADDR
Error
ENTER : Set Clock / Contrast
Clr
Esc
Off
No communication error Communication error
No supply voltage
Sufficient capacity of
the internal battery
l
: MSP
: 1.01
: NO ERROR
Blinking
on the system bus
(CAN)
−
−
EDBPM−H410 DE/EN/FR 4.1