Preface And General Information; About These Operating Instructions; Terminology Used; Scope Of Supply - Lenze EPM-H410 Betriebsanleitung

1

Preface and general information

The operating unit enables you to access codes of Lenze controllers,
9300 Servo PLCs and Drive PLCs and to control them in a comfortable way.
Communication takes place via the system bus (CAN).
The Lenze »HMI Designer« software makes programming of the operating unit
easy.
1.1

About these Operating Instructions

These Operating Instructions serve to ensure safe and trouble−free
ƒ
working on and with the operating unit.
All persons working on and with the operating unit must have these
ƒ
Operating Instructions available and observe the information and notes
relevant for them.
These Operating Instructions must always be complete and perfectly
ƒ
readable.
1.2

Terminology used

Term
Controller
HMI
1.3

Scope of supply

Scope of supply
1 EPM−H410 operating unit (without
l
battery)
1 Operating Instructions
l
l 6 M4 hexagon nuts
6 plain washers M4
l
1 terminal strip, 4−pole for connection of DC
l
voltage supply
l 1 terminal block, 5−pole, for system bus
(CAN) connection
EDBPM−H410 DE/EN/FR 4.1
Preface and general information
About these Operating Instructions
Used in this text for
Lenze 8200 vector and 9300 vector frequency inverter, Lenze 9300
and 9400 servo inverter
Human Machine Interface
Important
After receipt of the delivery, immediately check
whether the items delivered match the
accompanying papers. Lenze does not accept
any liability for deficiencies claimed
subsequently.
Claim
visible transport damage immediately to the
l
forwarder.
visible deficiencies/incompleteness
l
immediately to your Lenze representative.
l
1
59