Attaching The Accessories; Operation; Turning On The Appliance - Kärcher SGV 6/5 Bedienungsanleitung

Attaching the Accessories

DANGER
Risk of scalding! In order to prevent steam
from escaping when accessories are dis-
connected, the safety catch on the steam
switch must be pulled out.
 Check accessory for safe connection
prior to use.
Accessories with plug connection
 Open the cover of the accessory outlet,
plug the accessory plug in the accesso-
ry outlet and snap it in place audibly.
 Connect accessory: Connect the han-
dle or the steam suction hose with the
desired accessory. Slide parts into each
other until the accessory lock snaps into
place.
 Disconnect accessory: Hold the acces-
sory lock down and pull the accessory
parts apart.
Accessories with screw connection
 Connect and hand-tighten screwable
accessories.
Replacing the inserts of the floor
Illustration
Replacing the inserts of the hand
Illustration

Operation

Always place the machine in a horizontal
position during operation.
Only SGV 8/5:
– Text or a line/bar presentation is shown
on the display.
– The line/bar presentation depicts a cer-
tain period of time. At the beginning of the
period of time 10 bars are shown, which
are replaced by lines from the right to the
left until 10 lines are shown in the end.
# # # # _ _ _ _ _ _
24
nozzle
nozzle
Display
Text
Factory-set display language
– EU/CH: German
– GB: English
Users, whose national language is not
available as the display language:
 Select English as the display language.
Selecting the display language
Available display languages:
– German
– English
– French
– Spanish
– Japanese
 Set the rotary switch on the appliance to
"0/OFF".
 Set the handwheel on the handle to
cold water.
 Press the suction button and the steam
switch.
 Set the rotary switch to cold water/suc-
tion operation.
The lower line is flashing as the display lan-
guage has not been saved yet.
 Release the suction button and the
steam switch.
 Select a language by means of the
handwheel.
 Press the steam switch in order to save
the display language. The bottom line
stops flashing.

Turning on the Appliance

ATTENTION
Risk of damage! Do not tilt the appliance
while it is switched on.
 Plug in the mains plug.
 Set the rotary switch to the desired op-
erating mode.
– 5
EN
language
German
filling process
please wait