Installation Notes - Eliwell ST544 Bedienungsanleitung

REMOTE CONTROL KIT FOR WATER COOLERS
CONTROLS:
After the installation of the kit, check the correct working efficiency by proceeding as follows:
• Power up the system and check that the displays of the two control panels indicate the temperature of the
return water from the system (factory setting).
Now all the functions can be controlled indifferently either by the terminal on-board the machine or by the
remote keypad in the environment.

INSTALLATION NOTES:

The device is designed for wall-mounting.
The environmental temperature range for a correct functioning is between -5 and +60 °C.
Avoid mounting the device in high dirty or humid places.
Ensure a good ventilation near the vents of the device.
PERMITTED USE CONDITIONS:
For safety reasons, the device must be installed and used following the instructions provided and in particular, under
normal conditions, any parts with dangerous tension must not be accessible.
The device must be adequately protected from water and dust and it must be accessible only with tools.
The device is suitable for incorporation into a machine for domestic and/or similar cooling and conditioning use.
Any uses other than these ones are absolutely forbidden.
AND HEAT PUMPS
18