Contents Of The Package - Eliwell ST544 Bedienungsanleitung

REMOTE CONTROL KIT FOR WATER COOLERS
These instructions are an integral part of the booklet of the machine on which the KIT has been installed.
Consult this booklet for the GENERAL INSTRUCTIONS and the MAIN SAFETY RULES
DESCRIPTION OF THE KIT:
This is a system for remote-controlling of the reversible heat pumps and water chillers fitted with on-board ELIWELL
ST544 controller.
It consists of a KEYPAD WITH DISPLAY suitable for wall-mounting, to be positioned in the place where the device can be
controlled from.
The KIT can be installed at a maximum distance of 100 metres from the appliance and replaces all the functions of the
control panel on-board the machine.

CONTENTS OF THE PACKAGE:

The package contains the following parts:
- N° 1 instructions sheet
- N° 1 remote control panel
- N° 1 one metre tri-polar cable fitted with JST 3p type connector
REMOTE CONTROL PANEL:
The remote control panel consists of a DISPLAY and a series of buttons, which are necessary for carrying out the
operation required for the machine functioning. It performs in parallel all the functions of the controller on-board the
machine.
DISPLAY:
The display replicates the fundamental display set on terminal ST544. It also displays the time and the operating mode,
the alarms, the values and the operating and adjustment parameters of the machine.
COOLING mode
AND HEAT PUMPS
13
HEATING mode (only heat pump version)