Service Menu For Ppb 30 Rc - Maico PPB 30 K Montageanleitung

10.4 Service menu for PPB 30 RC

PPB 30 RC LEDs
The orange operating
mode LED flashes
once per cycle
The orange operating
mode LED flashes
twice per cycle
The orange operating
mode LED flashes
three times per cycle
The orange operating
mode LED flashes
four times per cycle
LED flashing modes:
Parameter Setting value Setting/Description
Operating 1
modes 2
Sensor 0
1
2
Ventilation 0
levels 1
1
Auto/manual
dehumidifica-
tion function 2
selection
3
4
LED flashing rapidly
10 Commissioning | UK
bold = factory setting
Automatic operation (red LED 1x)
System operation (red LED 2x)
Two operating modes can be selected
here:
Automatic operation: Unit usually works
autonomously according to internal
sensor.
System operation: The unit usually works
according to the controller specifications.
For a more detailed description
ting instructions, chapter 6.6.
inactive (red LED OFF)
active 40 % - 70 % r. h. (red LED 1x)
active 45 % - 80 % r. h. (red LED 2x)
The limit values of the integrated
humidity sensor can be set or deacti-
vated here.
Ventilation level Off possible
(red LED OFF)
Ventilation level Off blocked
(red LED 1x)
With the ventilation level "0" blocked
setting, the ventilation units cannot be
switched off on this control. The units
then run with at least ventilation level 1.
Automatic exhaust air mode / Manual
exhaust air mode (red LED 1x)
Automatic exhaust air mode / Manual
intensive ventilation (red LED 2x)
Automatic intensive ventilation / Manual
exhaust mode (red LED 3x)
Automatic intensive ventilation / Manual
intensive ventilation (red LED 4x)
The dehumidification function for the
sensor (Automatic) and for the button
(manual) can be set here.
LED flashing slowly
Opera-

49