Herunterladen Inhalt Inhalt Diese Seite drucken

Application Example - Maico PPB 30 K Montageanleitung

Endmontage-set für pushpull lüftungssysteme
Vorschau ausblenden Andere Handbücher für PPB 30 K:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8 Application example

Ventilation solution for a 3-room flat
with PPB 30 K (bathroom) and PP 45
(living spaces) ventilation units
The PPB 30 in the bathroom aerates and
ventilates the room at the same time in bal-
anced mode. A fan in the unit extracts air and
first transfers the exhaust air heat to the heat
storage tank. Another fan in the unit pumps
the supply air into the room across the heat
storage tank, which gives off this heat. Every
60 seconds, the air direction changes, thereby
permitting a ventilation mode with constant
heat recovery.
Intensive ventilation can be activated via a
humidity sensor or manually with a button if
the humidity is high and/or if the air quality is
inadequate.
8 Application example | UK
Pure exhaust air mode is also possible and
here the two fans pump out humidity (no heat
recovery).
Combined with PP 45 single-room ventilation
units for supply air rooms, a decentralised
ventilation system for flats can also be pro-
duced for redevelopment projects.
Then the PP 45 units ensure an increased
supply of air and therefore balanced ventila-
tion, even if exhaust air mode is sometimes
used.
1 PP 45 ventilation unit
with alternating oper-
ation
for continuous venti-
lation
of living spaces
2 PPB 30 K ventilation
unit
with balanced operation
for continuous ventilation
in the bathroom
3 RLS 45 K
room air control
Supply air and
exhaust air with change of
direction
Outside air and
outgoing
air with change of direction
35

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rls 45 oRls 45 kPpb 30 rcPpb 30 o

Inhaltsverzeichnis