Service Menu For Rls 45 K - Maico PPB 30 K Montageanleitung

UK | 10 Commissioning

10.3 Service menu for RLS 45 K

LEDs
LED flashing modes:
46
Parameter Set value /
ventilation level
1
Device type
on RLS 2
(Fan1/Fan2)
Number of device 1
pairs/ 2
devices on RLS 3
(Fan1/Fan2) 4
5
Ventilation levels 1
2
LED flashing rapidly
bold = factory setting
Setting /
description
PP 45
PPB 30 O
The type family, which is connected
to the Fan1/Fan2 fan interface, is
selected here.
Notice: Only single-type PP 45 or
PPB 30 unit combinations are per-
mitted at the fan interface!
1 device pair PP 45 or 1 PPB 30
2 device pairs PP 45 or 2 PPB 30
3 device pairs PP 45 or 3 PPB 30
Odd number, 3 devices PP 45
Odd number, 5 devices PP 45
The number of units connected to the
fan interface (Fan1/Fan2) is selected
here.
Notice: Release/number of PPB 30 K
units is taken into account in another
sub-menu (PPB 30 K parameters).
Ventilation level "0" possible
Ventilation level "0" blocked
With the ventilation level "0" blocked
setting, the ventilation units cannot
be switched off on this control. The
units then run with at least ventilation
level 1.
LED flashing slowly