Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▲
BEFORE FIRST USE:
RINSING THE KETTLE
Before the first use, the kettle has to be rinsed. Proceed as follows:
•
Remove the lid from the kettle by pushing both lid locks inward and simultane-
ously lifting the lid.
•
Wash the lid under running water with a soft cloth and dry it.
•
Fill the kettle with cold tap water to the MAX marking on the inside of the ket-
tle.
Caution: The MAX marking must never be exceeded! The maximum capacity
is 1,5 liters.
•
Place the filled kettle on the appliance base and close the lid, locking it into place.
•
Plug the power plug into a suitable power socket.
•
Touch the ON/OFF button and then repeatedly the
lights up at 100.
•
Wait for the water to come to the boil. The end of the boiling process is indi-
cated by an acoustic signal and all control lights going out (except for the one
indicating the selected temperature). Then, carefully pour the water out of the
spout. To do this, press the button for unlocking the spout latch.
•
Repeat the process twice more.
•
Now, your appliance is ready for operation.
50
4
button, until the blue dot
Werbung
Inhaltsverzeichnis
