Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Starting And Stopping The Engine; Mowing; Working Instructions - FLORABEST FBM 190 A1 Originalbetriebsanleitung

Benzin-rasenmäher
Vorschau ausblenden Andere Handbücher für FBM 190 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 77
- Do not smoke whilst refuelling;
- Avoid skin contact and inhala-
tion of the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks,
open flames and other ignition
sources;
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (
pour in the petrol to the lower edge of
the filler.
Do not fill the tank entirely, to allow
the petrol room to expand.
2. Wipe away petrol residues around the
filler cap and close the filler cap.

Operation

Observe the noise protection and
local regulations.
Starting and Stopping the En-
gine
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
Check the petrol and oil levels
regularly (see "initial operation")
and refill in time.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool

Mowing

9) and

Working Instructions

General Working Instructions

is touching neither objects nor the
ground.
Start the Engine:
1. Place the throttle (26) in position
.
2. Pull the safety catch (3) towards
the handle bar and hold it.
3. Pull the starter cord (23) and the
engine starts.
Stopping the Engine:
4. Release the safety catch (3),
the engine stops and the blade
is slowed.
1. Start the engine (see above).
2. Wheel drive on: pull the drive
catch (1) towards the handle
bar. The mower moves for-
wards.
3. Wheel drive off: release the drive
catch (1). The equipment stops.
For short breaks and to reduce
noise, place the throttle (26) in po-
sition
.
As far as possible, mow the lawn when
it is dry in order to protect the turf.
Set the cutting height such that the
equipment is not overloaded.
Run the equipment at walking speed
in lines that are as straight as pos-
sible. For uninterrupted mowing, the
lines should always overlap by a few
centimetres.
Do not move backwards.
GB
MT
67

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis