Instructions For The User; Operating The Fireplace For The First Time; Turning Off The Main Burner; Turning Off The Pilot Flame - WANDERS Bordeaux Orsanne Gebrauchsanweisung Und Montage Vorschriften

 

3.0 INSTRUCTIONS FOR THE USER

The operating switches of the fireplace are placed in the middle of the appliance behind the valve.

3.1 Operating the fireplace for the first time

Open the gas tap, which is mounted in the gas pipe leading to the fireplace.
Turn ignition button  to the left in the direction of ignition up to the end stop; then press it and wait for
a few seconds. You will hear a click when pressing the button and turning it further to the left.
You can see through the glass window on the left side of the stove if the pilot flame has lit. Repeat these
actions if the pilot has not lit.
Once the pilot flame is burning, keep the ignition button pressed for at least 30 seconds, then release
the pressure, and the pilot flame should still be burning. Now turn button  further to the left to put the
flame higher.
Now the continuously variable  knob can be set at the desired setting between high and low with the
remote control.
You will learn which setting is most suitable for your room.
Operating the remote control is simple: knob () to let the flame burn higher, and knob () to let the
flame burn lower or let the flame extinguish.

3.2 Turning off the main burner

You can turn off the main burner by keeping knob () of the remote control pressed until the LED light
starts blinking on the receiver. You can also shut off the burner by turning the ignition knob A clockwise
until the end stop.

3.3 Turning off the pilot flame

You can turn off the pilot flame by pressing the ignition knob lightly and turn it further to the right.
3.4 Instructions for the user
• Do not place any combustible objects underneath or in front of the gas fire.
19