Warranty - Baier BDB 802 Bedienungsanleitung

EN
12

Warranty

The power tools placed on the market and distrib-
uted by Maschinenfabrik OTTO BAIER GmbH take
into account the regulations of the laws concerning
engineering tools and equipment to protect against
risks to health and safety.
We guarantee the perfect quality of our products
and accept the costs of subsequent repairs by re-
placing the damaged parts or replacement with a
new tool in case of design, material and/or manufac-
turing errors within the warranty period. The war-
ranty period for commercial use is 12 months.
The following are prerequisite for a warranty claim
due to design, material and/or manufacturing errors:
1. Proof of purchase and compliance with the
instruction manual
A mechanically produced original copy of a pur-
chase voucher must always be submitted in or-
der to make a warranty claim. It must contain the
complete address, date of purchase and type
designation of the product.
The instruction manual for the respective ma-
chine and the safety instructions must have
been complied with.
Damage due to faulty operation cannot be rec-
ognised as a warranty claim.
2. Correct deployment of the machine
Maschinenfabrik OTTO BAIER GmbH's prod-
ucts are developed and produced for specific
purposes.
A warranty claim cannot be acknowledged in the
event of failure to comply with the intended use
in accordance with the instruction manual, mis-
use or use for another purpose or use of unsuit-
able accessories. The warranty does not ap-
ply if the machine is deployed in continuous and
piece-work operation or for rental and hire pur-
poses.
3. Compliance with servicing intervals
Regular servicing by us or a servicing and re-
pair firm authorised by us is prerequisite for war-
ranty claims. Servicing is specified for when the
carbon brushes are worn, however at least once
a year.
The machine must be cleaned in accordance
with the provisions of the instruction manual. All
warranty entitlements expire in case of interven-
tion/tampering with the machine by third parties
(opening the machine).
Servicing and cleaning work are not generally
covered by the warranty.
4. Use of original BAIER spare parts
Ensure that original BAIER spare parts and BAI-
| 44 |
ER accessories only are used. They are availa-
ble from authorised dealers. The type and quan-
tity of grease are to be used according to the
valid grease list. Use of non-original parts can
cause consequential damage to the machine
and an increased risk of accidents. Dismantled,
partly dismantled machines and machines re-
paired with third party spare parts are excluded
from the warranty.
5. Wearing parts
Certain components are subject to use-induced
wear or normal wear and tear caused by use of
the respective power tool. These components
include, among other things, carbon brush-
es, ball bearings, switches, power cords, seals,
shaft sealing rings. Wearing parts are not cov-
ered by the warranty.