Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.11
Setting the FLASH time
1.
Press the menu button
2.
Select the BASE menu with
3.
Select the RECALL function with
4.
Select the flash time RECALL 1 (80ms), RECALL 2 (100ms), RECALL 3 (180ms), RECALL
4 (300ms) or RECALL 5 (600ms) with
5.
Exit the entry mode by holding the
8.12
Setting the length of the pause
1.
Press the menu button
2.
Select the BASE menu with
3.
Select the PAUSE function with
4.
Select the time PAUSE 1 (1), PAUSE 2 (1,5s), PAUSE 3 (2s) or PAUSE 4 (3s) with
and
and confirm with
5.
Exit the entry mode by holding the
8.13
Restoring factory settings
The handset and the base station are reset to the factory settings using this function. The phone
book, the caller list (CLID) and all phone numbers in the redial facility will be deleted.
Factory settings:
Language: German
Battery warning tone: On
Range warning: On
Button click: On
Receiver volume: 4
Pin code: 0 0 0 0
Pause: 3 sec.
FLASH time: 100ms
1.
Press the menu button
2.
Select the BASE menu with
3.
Select the DEFAULT function with
4.
Enter the PIN code using the number pad (factory setting 0000).
5.
Confirm with the menu button
6.
After a short time, the factory settings will be restored. The display will indicate the ready
mode once more.
- Special functions -
OK
.
and confirm with
and confirm with
INT
button pressed.
OK
.
and confirm with
and confirm with
OK
.
INT
button pressed.
Handset name: D6017
Automatic call accept: On
External ring tone: 2
Internal ring tone: 3
Handset ring tone volume: 4
Base ring tone: 3
Base ring tone volume: 4
OK
.
and confirm with
and confirm with
OK
.
OK
.
OK
.
and
and confirm with
OK
.
OK
.
OK
.
OK
OK
.
.
101
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
