Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.8
Activating/Deactivating warning tones
Here, various warning tones can be activated or deactivated.
Button click - Each time a button is pressed, the handset confirms with a button click. The
button click can be switched on or off.
Warning tone for low battery - If the battery capacity is too low, a warning tone will remind you
that you must charge the handset.
Range warning - If you are too far away from the base station, a warning tone will remind you
that you are losing contact with the base station.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the TONES function with
4.
Select one of the functions KEYTONE, LOW BATT or RANGE with
confirm with
5.
Switch the selected warning tone on or off with
6.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.9
Changing the PIN code
Some functions of the telephone system are protected against unauthorised use by a PIN code.
The PIN code can consist of up to eight numbers. As supplied, the PIN code is set to "0000". To
change the PIN code, proceed as follows:
1.
Press the menu button
2.
Select the BASE menu with
3.
Select the CHANGE PIN function with
4.
Now enter the current PIN code using the number pad (factory setting 0 0 0 0) and confirm
OK
with
.
5.
Now enter the new PIN code using the number pad and confirm with
6.
Now enter the new PIN code once more for confirmation and confirm with
7.
Now select further menu functions or exit the menu by pressing and holding the
button.
If the old PIN code is not entered correctly, the process will be aborted.
8.10
Setting the display language
The display messages can be set up in German, Italian, English, French and Spanish.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the LANGUAGE function with
4.
Select a language with
5.
Exit the entry mode by holding the
100
- Special functions -
OK
.
OK
.
OK
.
OK
.
and
and confirm with
and confirm with
and
and confirm with
and confirm with
and confirm with
and confirm with
and confirm with
INT
button pressed.
OK
.
OK
.
and confirm with
OK
.
OK
.
OK
OK
.
OK
.
OK
.
and
and
OK
.
INT
.
OK
.
INT
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
