3-4. Using the reference point
In the MJ500, MJ600, and MJ700, the reference point
prerecorded in the encoder can be input from the encoder
signal input connector as an analog reference point gate signal,
and the reference point signals can be output in
synchronization with the A/B phase signals.
Also, signals from external sensors or switches and other
devices can be input from the reference point connector as
an external connector-type reference point gate signal, and
the reference point signals can be output in synchronization
with the A/B phase signals.
For more information about the input specifications and
connection methods for the reference point gate signals, refer
to "5-2. Analog and encoder input signal specifications,"
"5-3. External contact-type reference point gate input signal
specifications," and "4. Input and Output Connectors."
(E) 13