Intended Use; Features; Delivery Content - VOLTCRAFT IR-2200-50D USB Bedienungsanleitung

2.

INTENDED USE

The infrared thermometer is a measuring device for non-contact temperature measurement. It
determines the temperature based on the emitted infrared energy and the emissivity of an object.
This type of measurement is very useful to measure objects that are hot, difficult to reach or moving.
The device measures the surface temperature of an object. The temperature behind transparent
surfaces such as glass or plastic cannot be measured. The temperature measuring range is between
-50ºC and +2200 ºC (-58 bis +3992 ºF). A 9 V block battery is required for power supply. In addition to
contact-free infrared temperature measurement, the device may also be used for measurements with
traditional temperature sensors (K type). With its integrated USB interface it is possible to transmit
temperature data to a computer.
This product is EMC-tested and meets the requirements of the applicable European and
national directives. Compliance assessment (CE marking) was passed successfully; the
relevant statements and documents are available from the manufacturer.
This product may only be used as described above, otherwise it may incur damage. There are
additional dangers such as short-circuits, fire, electric shocks. Read the operating instructions
thoroughly and keep them for future reference.
3.

FEATURES

• Dual targeting laser with focal point
• Integrated alarm function with high and low alarm values and visual as well as acoustic
signalling.
• Saves maximum, minimum, and average temperatures as well as temperature differences during
measurements
• Continuous measurement function
• Emissivity adjustable from 0.10 to 1.00
• Additional temperature measurement via type K contact sensor
• Backlight for the display can be switched on
• Can store up to 100 measured values
• Transmission of temperature measurement values to a computer via the USB interface
4.

DELIVERy CONTENT

• Infrared thermometer
• Storing case
• 9V block battery
• K-type wire sensor
20
• USB interface cable
• Software CD
• Tripod
• Operating instructions