Maintenance; Maintenance Schedule - Husqvarna 543RBK Bedienungsanweisung

Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of

Maintenance

Clean the external surface.
Examine the harness for damages.
Do a check of the handle and the handlebar to make sure that they are attached
correctly and not damaged.
Make sure that the throttle trigger lock and the throttle operates correctly.
Do a check of the stop switch to make sure that it operates correctly.
Make sure that the cutting attachment does not rotate at idle speed.
Clean the air filter. Replace if it is necessary.
Make sure that the blade is sharp and put correctly in the center, look for cracks.
If the blade is not in the center correctly, it can cause damage to the product.
Examine the cutting attachment guard for damages and cracks. Replace it if it is
damaged.
Examine the trimmer head for damages and cracks. Replace it if it is damaged.
Make sure that the screws and nuts are tight.
Examine the engine, the fuel tank and the fuel lines for leaks.
Examine the transport guard. Make sure that the blade is not damaged and that
the transport guard can be attached correctly.
Clean the cooling system.
Examine the starter and the starter rope for damages.
Examine the vibration damping units for damages and cracks.
Clean the external surface part of the spark plug. Remove it and do a check of
the electrode gap. Adjust the electrode gap to the correct distance (refer to
Technical data on page 24 ) or replace the spark plug. Make sure that the spark
plug has a supressor.
Clean the external surface of the carburetor and the area around it.
Do a check of the bevel gear to make sure that it is filled ¾ with lubricant. Use
special grease to fill if it is necessary.
Clean or replace the spark arrestor mesh on the muffler.
Do a check of the fuel filter for contamination and the fuel hose for cracks or oth-
er defects. Replace if it is necessary.
Do a check of all cables and connections.
1099 - 001 - 01.03.2019
Maintenance
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.

Maintenance schedule

Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
19