Residual Risks; Vibrations; Safe Working; Personal Safety - ATIKA RMC 40-510 Originalbetriebsanleitung

Residual risks

Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due to
the design determined by the intended purpose.
Residual risks can be minimised if the "Safety
information" and the "Intended usage" as well as the
whole of the operating instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the
equipment.
 Failure to observe the safety precautions can lead to injury
to the operator or damage to property.
 Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the cutting blades.
 Stones and soil may be thrown off.
 Electric shock.
 Touching live parts of opened electrical components.
 Impairment of hearing when working on the machine for
longer periods of time without ear protection.
 Eye injury when failing to wear safety goggles or visor.
 Health impairment resulting from exposure to hand arm
vibration if the machine is used too long or is not properly
guided and maintained.
 Warning! This device generates an electromagnetic field
during operation. Such a field may affect active or passive
medical implants under certain circumstances. To reduce
the risk of serious injuries we recommend persons who
carry medical implants to consult their doctor and the
manufacturer of the medical implant before operating this
device.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.

Vibrations

(hand arm vibrations)
Hand arm vibration a = 2,2 m/s²
h
Measuring uncertainty K = 1,5 m/s²
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of the vibration
exposure.
The actual vibration emission level during the use of
the machine may differ from that indicated in the operating
instructions or indicated by the manufacturer.
This may be caused by the following factors to be minded
before and during the use:
 Proper use of the machine
 Proper condition of the machine for use
 Is the sharpness of the cutting blade in order or the cutting
blade correctly installed?
 Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
14
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be considerably
reduced over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions
in the manual. If you intend to use this machine frequently,
contact your local authorised dealer and purchase anti-
vibration accessories if required. Avoid the use of this machine
at temperatures under 10°C. Create a work schedule in order
to minimise vibration exposure.
!

Safe working

When improperly handled lawn mowers may
!
be dangerous. The use of electrical tools
requires the observation of basic safety
precautions to eliminate risk of fire, electrical
shock and personal injuries.
Before commissioning this product, read and
keep to the following advice. Also observe the
preventive regulations of your professional
association and
applicable in the respective country, in order to
protect yourself and others from possible
injury.
 Pass the safety instructions on to all persons who work
with the machine.

Keep these safety instructions in a safe place.

Personal safety

 Familiarise yourself with the unit, the adjustment elements
and the proper use of the unit before using it by referring to
the original operating instructions.
 Be observant. Attend to what you do. Start working with
rationality. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments. One
moment of carelessness when using the device can result
in serious injuries.
 Do not use the machine for unsuitable purposes (see
"Normal intended use").
 The operator is responsible for accidents or risks which
occur to other persons or their properties.
 Always wear suitable protective equipment when operating
the unit:
 safety goggles
 ear protection (Sound intensity level at workplace can
exceed 85 dB (A))
 Always wear suitable work clothing when operating the
machine:
 no loosely fitting clothing or jewellery; it may be sucked
into the suction opening
 no loose clothing or such with hanging bands or
drawstrings
the safety provisions