Motion - Santec VTC-279IRPWD Bedienungsanleitung

5.7 Motion

Motion:
Enable or disable the motion detection function.
Area:
4 areas can be defined for motion detection.
Sensitivity:
Set the sensitivity for the motion detection area (0 – 30).
Display:
If „Trace" is enabled, the areas are briefly displayed when motion is detected.
If „Message" is enabled, a note/symbol is displayed in the upper right corner of the
picture.
Hold time:
No function.
Alarm output:
No function.
_________________________________________________________________________________
VTC-279IRPWD / VTC-280IRPWDU / VTC-289IRPWD
- 38 -
Bedienungsanleitung / User Manual