Motion - Santec VTC-HDH432IRPWD Bedienungsanleitung

5.7 Motion


Motion:
Enable or disable the motion detection function.

Area:
4 areas can be defined for motion detection.

Sensitivity:
Set the sensitivity for the motion detection area (0 – 30).

Display:
If „Trace" is enabled, the areas are briefly displayed when motion is detected.
If „Message" is enabled, a note/symbol is displayed in the upper right corner of the
picture.

Hold time:
No function.

Alarm output:
No function.
_________________________________________________________________________________
- 42 -
Bedienungsanleitung / User manual
VTC-HDH432IRPWD