Saw Blade Replacement; Troubleshooting - Scheppach wox d 700 Bedienungsanleitung

Saw blade replacement

1 Pull out the mains plug. Disconnect the drive shaft.
2 Wait until stationary and allow to cool down.
Saw blade replacement
• The blade change can be made only in firewood cutting posi-
tion.
• Side cover open.
• The locking pin (1) through the lower blade guard to lock the
saw blade stuck.
• M12 bolt the saw blade with the supplied hexagonal wrench (2)
solve
• Saw blade change
• M12 screw tighten with spanner fixed to 90 Nm.
• Replace saw blade
• Tighten M12 screw with an open-ended spanner to 90 Nm.
Attention! When inserting the saw blade, make sure the running
direction is correct.

Troubleshooting

To repair disfunctiones switch off the machine. Pull out power supply.
Cause
Upon switching off the saw does not slow down.
Brake board defect
Electrotechnical maintenance works should only be carried out by an electronics technician!
On removal of the machine the local legal regulations have to be abided by.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Direc-
tive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a
designated collection point. This can occur, for example, by handing it in at an authorised collecting point for the recycling
of waste electrical and electronic equipment. Improper handling of waste equipment may have negative consequences for
the environment and human health due to potentially hazardous substances that are often contained in electrical and electronic
equipment. By properly disposing of this product, you
are also contributing to the effective use of natural resources. You can obtain information on collection points for waste equip-
ment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical
and electronic equipment or your waste disposal company.
GB
Remedy
Renew brake board
�
�
�
�
Seite:81