Leaving Administration Mode - Geutebruck Pilot Bedienungsanleitung

7.
Close the window to save the settings.
‰ The network settings, such as IP address, can also be made directly in the Win-
Note

Leaving administration mode

After you have completed the system setup, you have to leave the administrator
mode and start the Pilot in user mode.
1.
+ +
2.
3.
V 1.3
GSCViewstation displays camerapictures which are administered in the network
from different DVRs (GeViScope/re_porter). GSCView-Actions will be sent as
broadcasts to network when this box stays empty. Find more details about ap-
plying Server-Connetions in GeViSoft-Setup GeViSet.
Using the monitor- and camera-number-range you can allocate offsets to video
inputs (e.g. cameras) and video outputs (e.g. monitors) to sign for every Pilot-
user his own address area in GeViSoft.
dows interface in System Settings.
If you have started the Pilot user interface, press the key combination Up Arrow
+ Down Arrow + Enter to open the logout dialog. Alternatively, you can use a
connected USB keyboard and press Alt + F4.
Select Log off and press OK.
From the login screen, select the user Pilot to start the user mode.
Installation and commissioning
29