Pilot/Center With Extension Units; Pilot Joystick; Pilot Jog/Shuttle - Geutebruck Pilot Bedienungsanleitung

Pilot/Center with extension units

The Pilot/Center is the core of the system management console, which is expanded
by the Pilot/Jog and Pilot/Joy expansion units.
‰ The expansion units can be connected to the left or right side of the base mod-
‰ In addition to the system connectors Pilot/Jog and Pilot/Joy expansion mod-
‰ The USB connection can also be used to power the expansion modules. This
Note

Pilot Joystick

The Pilot/Joy expansion unit is connected via USB or with a system connector to
the Pilot/Center.
The joystick is used for simple control of PTZ cameras and domes. Using the func-
tion keys, zoom and focus of the active camera can be operated. Four other function
keys F1 to F4 are user assignable.
The function keys of the Pilot/Joy are four separate keys assigned to the Joy, which
can trigger GeViSoft actions.

Pilot Jog/Shuttle

The Pilot/Jog expansion unit is also connected via USB or via a system connector
to the Pilot/Center.
The jog shuttle allows for easy operation of the digital video recorder. Using the
function keys, the markings for the export of a video sequence are set and the ex-
port started. Other function keys are freely programmable.
The function keys of the Pilot/Jog are four separate keys assigned to the Jog, which
can trigger GeViSoft actions.
V 1.3
ule in any order and combination. The connection is made either via USB cable
or – for direct connection – via the included S-connector.
ules have a standard USB type B port on the back, which can be connected to a
PC and over which autonomous operation of the device is possible.
means that the power is supplied optionally
x
Centrally via the connection of the power connector and the supply of the
expansion units via USB or
x
Via the power plug from Pilot/Center and expansion units. In this case, two
or more power plugs ensure increased reliability due to the redundant pow-
er supply of the entire system. If a circuit or a power supply fails, one of the
intact power supply units takes over supply of the system without interrup-
tion.
This type of power supply is recommended.
Device description
11