Changing The Touch Screen Settings In The System Settings - Geutebruck Pilot Bedienungsanleitung

Working with the Pilot
Modifying the interface
In the settings you can also customize the user interface:
1.
2.
Language
3.
Export format
4.
Customizing me-
5.
nus and buttons
You can save the settings on a USB storage device. To do so, log on as an adminis-
Tip
trator on the Windows interface. Then save the entire folder C:\PilotMap\Maps\.

Changing the touch screen settings in the system settings

You change the settings of the touch screen itself (such as sensitivity, calibration,
etc.) in the system settings on the Windows interface.
1. Log on to the Pilot as an administrator.
2.
3.
Exiting administrator mode
After you have completed the system setup, you have to leave the administrator
mode and start the Pilot in user mode.
1.
+ +
2.
3.
44
Go to the Desktop Settings tab.
Set the language of the user interface.
Select the format for data export.
Change the character set of the buttons, if desired.
Close the window. If you confirm the prompt with Yes, your settings are saved, if
you select No you will exit the dialog without saving and if you select Cancel,
you will return to the dialog.
Then do not open the Pilot interface, but rather go to the System Settings.
Various settings for the touch screen can be opened under Tablet PC Settings.
If you have started the Pilot user interface, press the key combination Up Arrow
+ Down Arrow + Enter to open the logout dialog.
Select Log off and press OK.
From the login screen, select the user Pilot to start the user mode.
V 1.3