Configuring A Device; Starting In Administrator Mode; Figure 17: Redundant Power Supply - Geutebruck Pilot Bedienungsanleitung

‰ To ensure proper protection against a power failure, you can connect a device

Figure 17: Redundant power supply

Configuring a device

Starting in administrator mode

To configure the Pilot, you must be logged into the system as an administrator. We
recommend using an external USB/PS2 mouse and possibly a keyboard.
Proceed as follows:
The Pilot is connected and the system is booted.
1.
+ +
2.
3.
4.
You are now on the Windows interface and can make the necessary settings
changes here.
Change the administrator password!
For initial commissioning, you must change the administrator password for security
reasons.
Write down the new password and keep it in a safe place.
V 1.3
to a 24 VDC battery supply. In case of a failure of the entire power supply, the
battery will power the system.
Using the key combination Up Arrow + Down Arrow + Enter, open the logout
dialog. Alternatively, you can use a connected USB or PS/2 keyboard and press
Alt + F4.
Select Log off and press OK. You will now see the Windows login screen.
Select the user Admin.
Enter the admin password masterkey.
Installation and commissioning
27