Personnel Qualification - WIKA T32.1S Betriebsanleitung

2. Safety
The technical specifications contained in these operating instructions
must be observed. Should the instrument be improperly handled
or operated outside of its technical specifications, it should be shut
down immediately and inspected by an authorised WIKA service
engineer.
If the temperature transmitter is transported from a cold into a warm
environment, the formation of condensation may result in the instru-
ment malfunctioning. Before putting it back into operation, wait for the
instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury to
personnel and damage to equipment.
The activities described in these operating instructions
■
may only be carried out by skilled personnel who have
the qualifications described below.
Keep unqualified personnel away from hazardous
■
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-
specific regulations, current standards and directives, are capable
of carrying out the work described and independently recognising
potential hazards.
Special operating conditions require further appropriate knowledge,
e.g. of aggressive media.
WIKA operating instructions temperature transmitter T32.xS
GB
7