Designated Use; Responsibilities Of The User - Abicor Binzel PP Betriebsanleitung

PP

1 Designated Use

1.1 CE marking
2 Safety
2.1 Designated use

2.2 Responsibilities of the user

The push-pull welding torches of the "PP" series guarantee constant and thus
problem-free wire feeding. This version is used predominantly for welding
aluminium, for thin wires and for long cable assemblies. They conform to EN
60 974-7 and are not considered devices having their own functions. Arc
welding can only be carried out in connection with a welding power supply.
These operating instructions only describe PP welding torches. PP welding
torches may only be operated using original ABICOR BINZEL spare parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
The enclosed safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose described in these instructions in the manner described. In doing
so, observe the operating, maintenance and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not
allowed.
• Keep the operating instructions within easy reach at the device for
reference and enclose the operating instructions when handing over the
product.
• Putting into operation, operating and maintenance work may only be
carried out by qualified personnel. Qualified personnel are persons who,
based on their special training, knowledge, experience and due to their
knowledge of the relevant standards, are able to assess the tasks assigned
to them and identify possible dangers (in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in
question.
• Ensure good lighting of the work area and keep the work area clean.
1 Designated Use
EN - 3