Select Saved Radio Stations; Programme The Alarm Time And The Alarm Type - Silvercrest IAN 285662 Bedienings- En Veiligheidsinstructies

Press the M+ / AMS button
begins the radio station search and fills the presets
with the radio stations it has found. The preset flashes briefly on the
display as each radio station is saved. The search stops when
1
all preset spaces have been filled or when the radio station has
been found.

Select saved radio stations

To select the presets
repeatedly.
Programme the alarm time
and the alarm type
Note: You can choose when programming the alarm times whether
you would like an alarm tone to ring or if the radio should switch on
when the alarm goes off. You can programme two different alarm times
(Alarm 1 / Alarm 2). Ensure that the radio has been switched off.
Press the DOWN / AL1 button
display the time will flash and a dot will appear in the left or
1
right corner beside the type of „alarm" (
To set the hour, press or hold the VOL - / HR -button
To set the minutes, press or hold the VOL + / MIN -button
Press the DOWN / AL1 button
„radio" ( ) as the alarm. On the display
left or right corner beside the alarm „radio" ( ). The time and the
dot are now blinking.
42 GB/IE
for approx. 2 seconds. The product
7
to , press the M+ / AMS button
or UP / AL2 button
12
or UP / AL2 button
12
up to
. On the
13
).
.
5
6
to set the
13
a dot appears in the
1
7
.