Mounting Instruction - R82 7163 Montageanleitung

Mounting instruction

Mounting the push brace
Follow the instructions below to mount the push brace:
1. Place the round bush in each side of the back of the Wombat and
mount them with the big bolt (A). Pay attention that the two holes
in the bush are to be placed placed horizontally (B), when the
bush is fastened with the enclosed 8 mm Allen key. Be aware of
the angled face of the bush. The bush should be mounted to the
back of the chair in a straight position (C).
2. Place the push brace onto the two bushes.
3. Place the small bolts (D) in the outer holes, through the push brace
and the bush. The bolt and nut are placed in the inside and fastened
with the enclosed 3 mm Allen key.
Do not ever use the push brace to lift/pull the chair up or down
from stairs, landings, curbs etc. The chair can only be lifted by
two persons lifting the frame evenly. Never use the push brace
to lift the chair.
C
A
B
D