Abicor Binzel PSB 31 Betriebsanleitung Seite 20

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
5 Putting into operation
5.1 Functional description
5.2 Manual cutting torch
5.3 AUT cutting torches
5.4 Equipping the torch body
5.5 Connecting the plasma-cutting
torch
5.5.1 Compressed air for plasma
and cooling gas.
5.5.2 Filtered compressed air free of
oil and water
5.6 Plasma-cutting torch with central
connector
5.7 Cutting process
EN - 2
EN-3 6
EN-3 6.1
EN-3 7
EN-3
EN-4 8
EN-4 8.1
8.2
EN-4
EN-5 9
EN-7
EN-7 10
EN-7
11
EN-7 11.1
11.2
EN-8
EN-8
EN-9
EN-9
EN-10
EN-13
EN-14
EN-14
EN-14
EN-15
Operating elements
Igniting the torch
Putting out of operation
Maintenance and cleaning EN-16
Cable assembly
Cutting torch
Troubleshooting
Dismounting
Disposal
Materials
Packaging
PSB
EN-15
EN-15
EN-16
EN-16
EN-16
EN-16
EN-18
EN-18
EN-18
EN-18