E N G L I S H
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Usage limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Introduction
Thank you for purchasing one for our products.
29
29
In order to get the best performance from the system
30
and ensure that its parts last as long as possible, you
must strictly follow the usage instructions and the
maintenance regulations included in this manual. In
the interest of customers, you are recommended to
have maintenance and, where necessary, repairs
carried out by the workshops of our service
34
organization, since they have suitable equipment and
specially trained personnel available. All our
34
machinery and systems are subject to continual
39
development. We must therefore reserve the right to
modify their construction and properties.
40
Description
40
150 and 170 is the welding machine based on the
inverter
41
components have been used to design and produce it.
Machines TIG LA are equipped with functions HOT
START - adjustable, ARC FORCE, ANTI STICK, TIG PULS,
TIG DOWN SLOPE, TIG end current, safety system
V.R.D.
Machines are designed mainly for production, main-
72
tenance, for assemblies or for utility rooms.
73
Usage limits
76
(EN 60974-1)
78
The use of a welder is typically discontinuous, in that
it is made up of effective work periods (welding) and
rest periods (for the positioning of parts, the replace-
ment of wire and underflushing operations etc. This
welder is dimensioned to supply a 150 A (series 150)
and 170 A (series 170) nominal current in complete
safety for a period of work 25% (series 170) or 45%
(series 150) of the total usage time. The regulations in
force establish the total usage time to be 10 minutes.
The 30% work cycle is considered to be 3 minute of
the ten-minute period of time.
- 29 -
Read carefully the instructions
included in this manual before using
the equipment.
technology.
Advanced
materials
and