Ingeteam INGECON SUN 10TL Handbuch Für Montage Und Betrieb Seite 107

DC connection
Terminal connection
1. Uninstall the polycarbonate guard.
2. The unit has quick connectors. If you want to make a connection via a terminal, remove the protective
covers and install the supplied packing glands.
3. Pass a cable through each packing gland and guide it to the corresponding terminal. If the cable used has
a diameter of between 7 and 11.5 mm, use the reducer that comes with the packing gland. If the cable
has a diameter of between 11.5 and 17 mm, discard this reducer.
ABI2011IQM01_B - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
107