FR
EN
DynaCox
®
DE
7.
Secure the position of the condylar
pads by carefully tightening the Allen
head screws (1Nm) (fig. 38).
38
8.
Close the condylar clasp by feeding
the hook-and-loop strap into the strap
guide and closing it (fig. 39).
39
9.
Close the thigh section of the
bandage (fig. 40).
40
38
User Manual
evoluti o n
The loop strap of the hook-and-loop
closure on the bandage can be shor-
tened with a suitable pair of scissors
(REF 60.397.001.00). Make sure to
cut between the loop fabric chevrons
when shortening the strap (fig. 41).
41
10.
Re-check the correct fit of the orthosis.
Make more adjustments if necessary.
11.
Once a correct fit has been achieved,
secure the Click & Lock closures on
the femoral panel and the hip brace.
Please note:
Only close the Click & Lock
closures by pushing against the latch with
your thumbs while simultaneously crea-
ting counter pressure with your fingers
(fig. 42). This will ensure that neither the
leg nor the hip of the patient are sub-
jected to any possibly harmful pressure.
42