Knurr CoolServe Betriebsanleitung Seite 5

CoolServe
Manual / Bedienungsanleitung
Only operate the CoolServe correctly within the stipulated
ratings and with approved equipment.
During all work on and with the unit, observe:
 The related applicable regulations (e. g. VDE regulations or
other applicable national regulations)
 The applicable accident prevention instructions (BGV)
 The applicable rules
 The applicable laws on the protection of the environment
Only operate the unit if it is in correct working condition. On the
occurrence of malfunctions or faults, you must shut down the unit
immediately and inform the responsible member of staff
in the operating organisation.
You are only allowed to use the unit again after its correct function has been re-
established.
Caution hot surface
Faulty fans, power supplies, control circuit boards can run hot.
Prior to starting work, let these cool down.
CoolServe 01_998_345_0_a page / Seite 5/77