CoolServe
Manual / Bedienungsanleitung
two way valve control characteristic (example)
4.
Storage and transportation
Store CoolServe in the original package at a dry and weatherproof place
Protect the CoolServe components from soiling (e. g. sand, rain, dust, etc.).
Keep storage temperatures between –30 °C and +50 °C / -22°F and 104°F.
The heat exchanger must be completely drained (to prevent the risk of
frost damage)
When stored for more than 1 year, check the the fan bearings prior to
installation. ( Turn fans by hand.)
All packaging is to be removed prior to commissioning CoolServe.
Don't use the chilled water fittings as handle
If CoolServe is moved in a mounted position (rack) make sure that CoolServe is fixed well
and saved again slipping
CoolServe
Start at 16°C
air inlet
temperature
01_998_345_0_a
page / Seite 13/77