Knurr CoolServe Betriebsanleitung Seite 27

CoolServe
Manual / Bedienungsanleitung
Dispose of the old fans correctly!
Regularly inspect the heat exchanger (annually)
- Check heat exchanger on air side for soiling and damage.
- Check feed and return for correct function.
- If necessary clean the air side.
- Regularly check odour trap (external) for correct function.
- Regularly visually inspect the water circuit for leaks.
The efficiency of heavily soiled heat exchangers is very limited these
have to be cleaned regularly. Use a vacuum cleaner, compressed air or
a soft brush to clean the fins.
Do not bend the fins during cleaning, because this will interfere with the
correct ait flow through the unit.
Regularly check the condensed water drain and clean if necessary
CoolServe 01_998_345_0_a page / Seite 27/77