Abstract; Safety; Work Safety Symbols - Knurr CoolServe Betriebsanleitung

CoolServe
Manual / Bedienungsanleitung
0.

Abstract

The CoolServe 19" slide-in unit provides the dissipation of heat loads from closed server racks
from 2 up to 6 kW.
The server rack is closed to the installation area, that means no heat load will dissipate to the
environment. (see also chapter 2.)
Cooling is provided by a closed cooling system via an air-to-water heat exchanger. The cooling
capacity is adapted to the accruing heat load.
The three HU high CoolServe can be installed at the horizontal 19" level as well in vertical slots.
Media entries (chilled water, power, alarms) are possible via bottom and top cover
1.

Safety

1.1

Work safety symbols

The following symbols identify specific hazards or provide information on safe operation.
CoolServe
Attention! Danger! Safety instruction!
Risk of electric shock or danger due to high voltage
Caution! Hot surface
Caution! Rotating parts / automatic start
Safety-related instruction
Attention! Identifies possible damage to the unit
Risk of electric shock
Note! Identifies possible hazards for the environment
01_998_345_0_a page / Seite 3/77