Variations And Options; Coolserve Sp (Variation); Use In Knuerr Server Rack Coolserve (Option) - Knurr CoolServe Betriebsanleitung

CoolServe
Manual / Bedienungsanleitung
6.

Variations and Options

6.1

CoolServe SP (variation)

CoolServe SP consists of same construction and function like CoolServe. The power supply is
provided by one mains unit. The chilled water flow rate is not influenced, the temperature control
works with the fan speed control.
6.2

Use in Knuerr Server Rack CoolServe (option)

We recommend to place the CoolServe Unit in a special designed server rack.
This rack offers an air separation between cold supply air (front) and the warm return air (rear).
The rack is equipped with chassis runners for two CoolServe units. There is also a cut-out in
the rack bottom for chilled water connection.
Furthermore general descriptions about the rack you will find in "Miracel" manuals
Server Rack CoolServe
Project prototype RAL 7035 (picture without side panel)
CoolServe 01_998_345_0_a page / Seite 19/77