Troubleshooting, Repair, Cleaning - Siemens SICAM MMU 7KG9663 Produktinformation

LEDs
RUN ERROR
H1 H2
C C
RUN ERROR ERROR
H1 H2
C C
RUN ERROR
H1 H2
C
C
RUN ERROR ERROR
H1 H2
C C
16

Troubleshooting, Repair, Cleaning

The user is not authorized to repair the device when it
is defective. This is because the device contains
special electronic components that may only be
handled by the manufacturer in compliance with the
regulations for electrostatic sensitive devices (ESD).
Furthermore, hazardous voltages can lead to lethal
injuries when the work is performed improperly.
If you suspect that the device has a defect, Siemens
recommends to send the entire device back to the
manufacturer. If possible, use the original transport
packaging or an equivalent packaging.
Cleaning: Switch off the device. Wiped the device with
a clean, dry and soft cloth. Do not use solvents.
SICAM MMU 7KG9663, Product Information
E50417-B1050-C514-A2, Edition 04.2013
Parameter setting of the LED
ERROR
RUN ERROR
ERROR; see device manual
C
H1 H2
C
C
DHCP (LED RUN (green) is lit after the IP
address was received by the DHCP server).
Default IP address was applied by pressing
the IP-Addr. push-button.
Double IP address detected.
Meaning
37