Siemens SICAM MMU 7KG9663 Produktinformation Seite 60

9.2 Mounting
Mount the device to a DIN rail according to EN 60750
in the following way:
Guiding of the
snap-on clip
DIN rail
Figure 9-1 Mounting on a DIN rail
1. Pull down the release device at the snap-on clip and
hold it in this position.
2. Slide the device with the guiding of the snap-on clip
on to one side of the DIN rail.
3. Move the device into the desired position on the
DIN rail.
4. Release the release device. The device is now
firmly mounted on the DIN rail.
16
Pulling direction
SICAM MMU 7KG9663, Product Information
E50417-B1050-C514-A2, Edition 04.2013
Snap-on clip
Release device