General Information - Siemens SICAM MMU 7KG9663 Produktinformation

Registered Trademarks
SIPROTEC
Siemens AG. An unauthorized use is illegal.
All other designations in this document can be
trademarks whose use by third parties for their own
purposes can infringe the rights of the owner.
NOTE
For further information, see the Device Manual
SICAM MMU 7KG9663, order number E50417-H1040-
C514.
2

General Information

These Product Information contain the information
required for the proper use of the devices described
here. They are intended for personnel suitably qualified
in electrical engineering with special training or relevant
expertise in the area of automation engineering.
To ensure the safe installation, commissioning,
operation and maintenance of the devices described in
this document, personnel must be familiar with and
practice the safety instructions and warnings in this
document correctly. Only electrically qualified
personnel (see "Personnel qualified in electrical
engineering") have the special knowledge required to
interpret the general safety notes and warnings in this
document correctly and apply them to suit the job at
hand.
These Product Information are an integral part of the
product. However, they cannot cover all details of all
versions of the devices described here, nor can they
provide for all possible conditions concerning
installation, operation, or maintenance.
SICAM MMU 7KG9663, Product Information
E50417-B1050-C514-A2, Edition 04.2013
® ®
and SICAM are registered trademarks of
5