The connections for all inputs and outputs, for the sup-
ply voltage and the protective grounding are located on
the terminal side of the device. The number, type and
layout of the connections is described in Chapter 12.
Mount for
snap-on unit
Figure 8-2 DIN Rail Side of SICAM MMU 7KG9663
The snap-on unit is mounted in the center of the DIN rail
side. The IP-Addr. push-button is located in the lower
right part. If necessary, it can be pressed (> 3 s) to
adjust the factory-set default IP address. The IP
address and the standard subnet mask are imprinted
on the side panel (see Figure 8-2).
14
Default IP Address : 192. 168.0.55
Default Subnet Mask : 255.255 .255.0
SICAM MMU 7KG9663, Product Information
E50417-B1050-C514-A2, Edition 04.2013
IP-Addr.
push-button