Philips FC8822 Bedienungsanleitung Seite 13

3 Use the + and - buttons on the docking station to set the hour. The set hour appears on the
display.
4 Press the select button to confirm the hour set. The minutes indication starts flashing.
5 Use the + and - buttons on the docking station to set the minutes. The set minutes appear on the
display.
6 Press the select button to confirm the minutes set. The indication 'Su' for Sunday starts flashing.
7 Use the + and - buttons on the docking station to toggle between cleaning programs (see the table
above for the programming options available).
8 Press the select button to confirm the program selected.
9 Press the set button to confirm the programming. Both the set mode indicator and the cleaning
program indicator stop flashing and turn solid.
10 When you have set a cleaning program, the display shows the cleaning program indicator and the
day or days selected. If you leave the robot on standby and its rechargeable battery is fully
charged, it will start cleaning at the programmed time on the programmed day or days.
Fan speed buttons
You can use the fan speed buttons to increase the fan speed to turbo or to switch off the fan. The
default setting is normal fan speed (Fig. 27).
1 Press this button to switch off the fan
2 Press this button to switch on the fan at normal speed.
3 The turbo fan button increases the fan speed.
Using the dry wipe attachment
The dry wipe attachment is a feature that allows you to clean hard floors with dry wipes.
Note: If you use the dry wipe attachment, the robot may have trouble crossing thresholds or climbing
onto rugs.
Preparing the dry wipe attachment for use
Turn the robot upside down and place it on the floor or on a table.
1 Place the dry wipe on a table and place the dry wipe attachment on the wipe with its fixation lugs
pointing towards you (Fig. 28).
2 Fold both ends of the dry wipe around the dry wipe attachment and fasten the dry wipe onto the
attachment by pushing the fixation blocks into the recesses (Fig. 29).
3 Insert the fixation lug of the dry wipe attachment into the opening just behind the wheel on one
side of the robot and push until you hear it lock into place with a click. Then repeat these actions
on the other side (Fig. 30).
4 Turn the robot and place it on the floor on its wheels with the dry wipe attachment touching the
floor.
Using the robot with the dry wipe attachment
When the dry wipe attachment is attached, you can use the robot in any mode and on all hard floors.
Do not use the dry wipe attachment on carpet or rugs.
Removing the dry wipe attachment
1 Remove the dry wipe attachment as soon as you have finished wiping the floor. To do so, turn the
robot upside down and place it on the floor or on a table.
2 Push one end of the dry wipe attachment towards the wheel on the other side of the robot to
release it. Then pull the attachment off the robot (Fig. 31).
English
13