First Start-Up & Operation Of The Boiler - Nibe Pellux 100/20 Bedienungsanleitung

5 First Start-Up & Operation of the Boiler
A
B
C
Description:
1. Time / time setting – shows time according to
previous settings. Touching the time will cause
opening of the time setting menu.
2. Day of the week / date setting – shows current
day of the week according to previous date set-
tings. Touching will cause opening of the date
setting menu.
3. Current temperature – shows current tempera-
ture read directly from the weather sensor.
4. Current boiler operating mode and tempera-
ture set at the boiler – shows currently selected
operating mode.
5. Boiler operating programme – shows current-
ly set programme. Touching will open the pro-
gramme menu for each day of the week.
6. Currently performed boiler activity and cur-
rent boiler temperature.
7. Turning the boiler on / off. Touching will open the
menu for turning the boiler on/off, and operating
mode for heating and domestic hot water.
8. Domestic hot water – shows current status for hot
water preheating. Touching will cause opening of
the Domestic Hot Water menu, which displays cur-
rent hot water temperature, operating mode, and
edition of settings for hot water in the tank.
PELLUX 100/20 TOUCH
PELLUX 100/30 TOUCH
1 2
12 11 10
9. Central heating 1/2 - shows current status for
preheating of the central heating medium. Touch-
ing will cause opening of the Central Heating 1
menu , which displays current heating tempera-
ture, predefined temperature, operating mode,
and edition of settings for central heating.
10. Burner - shows current status for burner op-
eration. Touching will cause opening of the Burn-
er menu, which displays burner operation status,
brightness level, and provides for editing the set-
tings.
11. Fuel - shows current fuel level in the tank follow-
ing prior fuel level calibration Touching will caus-
en opening of the Fuel menu, where you can cal-
ibrate fuel level in the tank and attach the tank
manually.
12. MENU - touching will cause opening of the main
controller MENU.
DIODES:
A. Boiler diode. On then the boiler is on.
B. Burner diode. On then the burner is working.
C. Alarm diode Flashing when alarms are active On
when the alarms have not been acknowledged.
3
9 8
Section 5 | First Start-Up & Operation of the Boiler
4
5
6
7
EN
9